collapse

User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Who's Online

  • Dot Guests: 9
  • Dot Hidden: 0
  • Dot Users: 0

There aren't any users online.

Printing 3d ShoutBox

Refresh History
  • Hozza: :wack0
    November 18, 2018, 09:38:18 AM
  • Gaza07: back where we should be
    November 17, 2018, 08:36:55 PM
  • Gary Walker: Oi Gaz
    November 17, 2018, 08:30:40 PM
  • Gaza07: Moved host but it didnt work out we are back where we were before every thing should run smoothly now
    November 17, 2018, 08:27:23 PM
  • Gaza07: Oi Gash
    November 14, 2018, 11:17:29 PM
  • Gaza07: Site was down for a short time I tried to add the likes thing again and cocked it up  :whistling:
    September 04, 2018, 07:47:57 PM
  • Gaza07: Im in nottingham was just wondering incase you were close
    August 19, 2018, 12:38:51 AM
  • slurm: st neots
    August 19, 2018, 12:11:46 AM
  • Gaza07: Slurm where are you from mate ? roughly
    August 18, 2018, 12:45:27 PM
  • Gaza07: oooh Tony's printer has landed  ~~
    August 17, 2018, 02:39:28 PM
  • Rammylad: Cheers Gaz, headaches to come lol
    August 14, 2018, 09:01:12 PM
  • Gaza07: Welcome Tony to the dark side
    August 14, 2018, 07:22:00 PM
  • Gaza07: It shows you came back but your not there thats weird
    August 13, 2018, 02:45:42 PM
  • Gaza07: Oh bugger
    August 13, 2018, 02:45:18 PM
  • Doug: I can't get in it mate showing as unavailable due to temporary outage
    August 13, 2018, 02:28:50 PM
  • Gaza07: The room was empty this morning  :rolleyes:
    August 13, 2018, 02:19:07 PM
  • Gaza07: Damn I nodded off no discord is fine Doug we just kicked all the lurkers which left 3 people  :rofl:
    August 13, 2018, 02:18:24 PM
  • Doug: is the discord server down?
    August 13, 2018, 02:04:17 PM
  • Gaza07: I'm bored think I need to build another printer  :blink
    August 11, 2018, 02:57:47 PM
  • Gaza07: HTTPS should now be fully working  :crossfingers:
    August 01, 2018, 06:58:23 PM

Board Stats

  • stats Total Members: 44
  • stats Total Posts: 1453
  • stats Total Topics: 145
  • stats Total Categories: 16
  • stats Total Boards: 45
  • stats Most Online: 169

Theme Select



Forum Default

Permanently

Author Topic: Kelant orbeat D100  (Read 1662 times)

0 Members and 1 Guest are viewing this topic.

Offline Gaza07

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: 403
  • Country: gb
    • View Profile
    • Multi Rotor UK
Kelant orbeat D100
« on: September 23, 2018, 05:42:31 AM »
Ive gone and ordered one of these SLA resin printers https://www.aliexpress.com/item/2018-Kelant-Orbeat-D100-sla-3d-printer-UV-LED-assembled-touch-screen/32908584604.html?spm=a2g0s.9042311.0.0.59564c4dRP5Tw4 £289.94 inc shipping from germany so no Tax to pay,
I have pointed out the spelling mistakes and they say it will be corrected  ~~

Custom built delta with Flex3Drive Gen 4 / Duet Electronics 330mm build area
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 180mm build area
AnyCubic 4max XY printer 210x210x300 build area
AnyCubic Kossel Mini 180x180x300 build area
Kelant Orbeat D100 DLP/SLA

http://www.multi-rotor.co.uk
https://www.thingiverse.com/Gaza07/designs

Offline Bad Raven

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 178
  • Country: gb
    • View Profile
Re: Kelant orbeat D100
« Reply #1 on: September 23, 2018, 11:52:21 AM »
Interesting choice. Where will it be used, as I understand the resins reallly do SMELL!
HobbyKing Fabrikator II Mini, 100x100x100. (a Malyan printer re-badged) - Modded with magnetic Flex Bed

Original Prusa i3 Mk3 (All Black)

Offline Hozza

  • Global Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Posts: 102
  • Country: gb
  • You don’t pay taxes—they take taxes.
    • View Profile
Re: Kelant orbeat D100
« Reply #2 on: September 23, 2018, 12:00:59 PM »
I've taken the plunge at that price :popcorn:
Makibox (sold)
i3 custom build (working)
Smartcore (sold)
Kossel XL Duet3D based (working)
HEVO Hybrid (designing mods, building and waiting on the slow boats from China)

Offline Gaza07

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: 403
  • Country: gb
    • View Profile
    • Multi Rotor UK
Re: Kelant orbeat D100
« Reply #3 on: September 23, 2018, 12:20:32 PM »
Interesting choice. Where will it be used, as I understand the resins reallly do SMELL!

If it smells really bad then it will be used in the shed  :popcorn: I'm looking forward to trying something different and the print quality is awesome  ~~
« Last Edit: September 23, 2018, 01:19:53 PM by Gaza07 »
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 330mm build area
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 180mm build area
AnyCubic 4max XY printer 210x210x300 build area
AnyCubic Kossel Mini 180x180x300 build area
Kelant Orbeat D100 DLP/SLA

http://www.multi-rotor.co.uk
https://www.thingiverse.com/Gaza07/designs

Offline Gaza07

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: 403
  • Country: gb
    • View Profile
    • Multi Rotor UK
Re: Kelant orbeat D100
« Reply #4 on: September 29, 2018, 01:07:15 PM »
Well my new printer arrived very well packed and in working order, The setup procedure is very simple and very quick to do a quick test of the lcd and light and its ready to go,
pour some of the resin into the vat about 100ml and your ready to print from the supplied usb drive, there is a bird cage sample print to test the printer.

   

Was the printer worth the money yes its a low cost entry level printer that performs better than some of the more expensive models,
would I recommend it yes I would its a new model and there are some tweaks need to be made at the factory to avoid marking some parts,
and the alignment of the screen to the build plate,
One thing to note is that resin printing is very different to the normal FDM we mostly use now, theres is a different slicer and models have to be hollowed out and drain holes added to drain any resin trapped inside, it doesnt use any kind of infill that we currently use, the hollowing out and drain holes are very simple to do using  meshmixer, models are also often tilted to 45 degrees to make the printing smoother,

Is it messy hmmm well it can be if your not prepared but its really not to bad once you have a system in place to deal with the printed parts and use nitrile gloves,

Does it smell yes it does but I dont find it bad and when its printing with the lid on I cant smell anything, when the lid is removed after a print you can smell it then and its a bit like a decorating smell, which I dont find to bad or offensive,

There is a whole new way to learn on how to print with resin and any knowledge you have gained up to know using FDM will be of no use what so ever, even the support used isnt quite the same as with FDM but I will probably make a more detailed post later.
« Last Edit: September 29, 2018, 03:16:58 PM by Gaza07 »
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 330mm build area
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 180mm build area
AnyCubic 4max XY printer 210x210x300 build area
AnyCubic Kossel Mini 180x180x300 build area
Kelant Orbeat D100 DLP/SLA

http://www.multi-rotor.co.uk
https://www.thingiverse.com/Gaza07/designs

Offline Bad Raven

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 178
  • Country: gb
    • View Profile
Re: Kelant orbeat D100
« Reply #5 on: September 29, 2018, 05:42:19 PM »
OK, here come the "maybe I need one but I'm suspicious" questions!   :rolleyes:

So you do a print, then need to change colour.  What is the process and how anal do you need to be?

How do you reuse part printed media?

What ensures its not part contaminated by the previous print process?

HobbyKing Fabrikator II Mini, 100x100x100. (a Malyan printer re-badged) - Modded with magnetic Flex Bed

Original Prusa i3 Mk3 (All Black)

Offline Gaza07

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: 403
  • Country: gb
    • View Profile
    • Multi Rotor UK
Re: Kelant orbeat D100
« Reply #6 on: September 29, 2018, 05:50:15 PM »
Hi BR I'm pretty new to this so dont know to much yet  :rolleyes: you can filter the remaining resin into a container to reuse later a simple plastic scraper will get most of the residue from the head and the vat then just a wipe down with IPA and you can then use a different colour you can see in this video how well a scraper moves the resin about and how easy it is to clean off, I will post more prints and info as I learn, the printing process is pretty quick 25 seconds exposure for the first 5 layers and only 5 seconds per layer after that the layer height im currently using is 0.05 mm it can go lower the prints are pretty awesome, but its very different to FDM and you have new stuff to learn which is all part of the fun  ~~

https://www.printing-3d.co.uk/index.php?topic=138.msg1370;topicseen#new

here's the prints from the video

   
« Last Edit: September 29, 2018, 06:23:33 PM by Gaza07 »
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 330mm build area
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 180mm build area
AnyCubic 4max XY printer 210x210x300 build area
AnyCubic Kossel Mini 180x180x300 build area
Kelant Orbeat D100 DLP/SLA

http://www.multi-rotor.co.uk
https://www.thingiverse.com/Gaza07/designs

Offline Gaza07

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: 403
  • Country: gb
    • View Profile
    • Multi Rotor UK
Re: Kelant orbeat D100
« Reply #7 on: September 29, 2018, 06:42:43 PM »
Flex3Drive worm gear box cases  ~~


Custom built delta with Flex3Drive Gen 4 / Duet Electronics 330mm build area
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 180mm build area
AnyCubic 4max XY printer 210x210x300 build area
AnyCubic Kossel Mini 180x180x300 build area
Kelant Orbeat D100 DLP/SLA

http://www.multi-rotor.co.uk
https://www.thingiverse.com/Gaza07/designs

Offline nate80

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 152
    • View Profile
Re: Kelant orbeat D100
« Reply #8 on: October 03, 2018, 08:32:04 AM »
How much does the resin cost? Is it easy to get lots of colours?

Offline Hozza

  • Global Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Posts: 102
  • Country: gb
  • You don’t pay taxes—they take taxes.
    • View Profile
Re: Kelant orbeat D100
« Reply #9 on: October 03, 2018, 09:36:32 AM »
Depends on the resin but you are looking at round £25 for 500ml

Unfortunately I have to sell my D100 due to I've found out I have an allergic reaction to the resin fumes, even though you can't smell them with the lid one.
Makibox (sold)
i3 custom build (working)
Smartcore (sold)
Kossel XL Duet3D based (working)
HEVO Hybrid (designing mods, building and waiting on the slow boats from China)

Offline nate80

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 152
    • View Profile
Re: Kelant orbeat D100
« Reply #10 on: October 04, 2018, 01:22:10 AM »
Sorry to hear that Hozza. That's a shame.  :-/

My other half is allergic to 3D printing. Whenever my printing equipment is dumped all over her kitchen her face flares up all red and she suffers from uncontrollable fits of verbal abuse!  :laugh:  Actually, I'm more the one that suffers!  :rolleyes:  :laugh:

Out of interest, if you're selling, how much you wanting for the D100 and can I ask where you're based?

Offline Gaza07

  • Administrator
  • Trade Count: (0)
  • Sr. Member
  • *****
  • Posts: 403
  • Country: gb
    • View Profile
    • Multi Rotor UK
Re: Kelant orbeat D100
« Reply #11 on: October 09, 2018, 02:06:47 PM »
I really like this print its my favourite one up to now, Its a Mondoshawan from the Fifth Element movie  ~~

Custom built delta with Flex3Drive Gen 4 / Duet Electronics 330mm build area
Custom built delta with Flex3Drive Gen 4 / Duet Electronics 180mm build area
AnyCubic 4max XY printer 210x210x300 build area
AnyCubic Kossel Mini 180x180x300 build area
Kelant Orbeat D100 DLP/SLA

http://www.multi-rotor.co.uk
https://www.thingiverse.com/Gaza07/designs

Offline nate80

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 152
    • View Profile
Re: Kelant orbeat D100
« Reply #12 on: October 11, 2018, 04:15:23 PM »
Beautiful print and great movie  ~~